ADTRAN 1000R Series - Manual (Page 840)

Command Reference Guide Demand Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 840
resource pool
Use the resource pool command to associate a resource pool with the demand interface. No more than one
resource pool may be associated with an interface. Refer to resource pool-member []
on page 577 for more information. Use the no form of this command to restore the default values.
Syntax Description
Specifies the resource pool that this interface will use to originate/answer demand
connections.
Default Values
By default, no resource pool is associated with this interface.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example associates the resource pool named Pool1 with demand interface 1:
(config)#interface demand 1
(config-demand 1)#resource pool Pool1