ADTRAN 1000R Series User Manual
Page 471
Command Reference Guide
Global Configuration Mode Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
471
logging forwarding priority-level [error | fatal | info | notice | warning]
Use the logging forwarding priority-level command to set the threshold for events sent to the configured
syslog server specified using the logging forwarding receiver-ip command. All events with the specified
priority or higher will be sent to all configured syslog servers. Refer to logging email priority-level [error |
fatal | info | notice | warning]
for more information. Use the no form of this command to
return to the default priority.
Syntax Description
Sets the minimum priority threshold for sending messages to the syslog server specified using the logging
forwarding receiver-ip command.
The following priorities are available (ranking from lowest to highest):
error
Logs events with error and fatal priorities.
fatal
Logs only events with a fatal priority.
info
Logs all events.
notice
Logs events with notice, warning, error, and fatal priorities.
warning
Logs events with warning, error, and fatal priorities.
Default Values
By default the logging forwarding priority-level is set to warning.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Command was introduced.
Usage Examples
The following example sends all messages with warning level or greater to the syslog server listed using
the logging forwarding receiver-ip command.
(config)#logging forwarding priority-level warning