ADTRAN 1000R Series - Manual (Page 158)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 158
show access-lists
Use the show access-lists command to display all configured access lists in the system (or a specific list).
Syntax Description
Optional. Specifies a particular access list to display.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 2.1 Command was introduced.
Functional Notes
The show access-lists command displays all configured access lists in the system. All entries in the
access list are displayed, and a counter indicating the number of packets matching the entry is listed.
Usage Examples
The following is a sample output from the show access-lists command:
>enable
#show access-lists
Standard access list MatchAll
permit host 10.3.50.6 (0 matches)
permit 10.200.5.0 wildcard bits 0.0.0.255 (0 matches)
extended access list UnTrusted
deny icmp 10.5.60.0 wildcard bits 0.0.0.255 any source-quench (0 matches)
deny tcp any (0 matches)