Crypto ca certificate chain
Page 360

Command Reference Guide

Global Configuration Mode Command Set

61200510L1-35E

360

crypto ca certificate chain

Use the crypto ca certificate chain command to enter the Certificate Configuration for the specified CA.
Refer to Certificate Configuration Command Set

for more information.

Syntax Description

Specifies a CA profile using an alphanumeric string (up to 32 characters).

Default Values

No defaults necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.

Command History

Release 5.1

Command was introduced.

Functional Notes

Typically used only in the running-config and startup-config to restore certificates.

Usage Examples

The following example enters the Certificate Configuration mode for the CA profile MyProfile:

(config)#crypto ca certificate chain MyProfile

Page 360