Login authentication Page 551
Page 551
Command Reference Guide
Line (SSH) Interface Config Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
551
login authentication
Use the login authentication command to assign the named AAA login list to use for authenticating users
connecting on this line. Use the no form of the command to remove the AAA authentication list.
Syntax Description
Specifies the name of the AAA login list to use for authentication.
Default Values
The default value is the default AAA list.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1
Command was introduced.
Functional Notes
If the AAA subsystem is activated but no login authentication list is given, the default list is used. If the
default list is used but the default list is not configured, SSH uses the local user database.
Usage Examples
The following example specifies that myList will be used for authenticating users connecting on this line:
(config)#line ssh 2
(config-ssh2)#login authentication myList