ADTRAN 1000R Series - Manual (Page 64)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 64
clear ip route [** | ]
Use the clear ip route command to remove all learned routes from the IP route table. Static and connected
routes are not cleared by this command.
Syntax Description
** Deletes all destination routes.
Specifies the IP address of the destination routes to be deleted.
Specifies the subnet mask of the destination routes to be deleted
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example removes all learned routes from the route table:
>enable
#clear ip route **