ADTRAN 1000R Series - Manual (Page 431)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 431
ip http [access-class in | authentication |
secure-access-class > in | secure-server | server |
session-limit | session-timeout]
Use the ip http command to enable web access to the unit.
Syntax Description
access-class Enables HTTP for all incoming connections associated with a specific access list.
Specifies the access list name.
in Applies to all incoming connections.
authentication Assigns the specified AAA list to HTTP authentication.
secure-access-class Applies to all self-bound HTTPS connections.
secure-server Enables the SSL server.
server Enables the HTTP server connection.
session-limit Sets the maximum number of sessions allowed. Valid range is 0 to 100 with 100
as the default.
session-timeout Sets the session timeout. Valid range is 10 to 86,400 seconds. The default is 600.
Default Values
By default, this command is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 and Total Access 900 Series units.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following example enables web access to the router:
(config)#ip http server