ADTRAN 1000R Series - Manual (Page 315)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 315
Usage Examples
The following is a sample show vlan output:
>enable
#show vlan
VLAN
--------------------
1
Name
--------------------
Default
Status
--------------
active
Ports
-----------
eth 0/5, eth 0/6, eth 0/8, eth 0/13, eth 0/14, eth 0/15,
eth 0/16, eth 0/17, eth 0/18, eth 0/19, eth 0/20, eth 0/21,
eth 0/22, eth 0/23, eth 0/24, giga-eth 0/1, giga-eth 0/2
2 accounting active eth 0/1, eth 0/2
3 VLAN0003 active eth 0/3, eth 0/4, eth 0/7, eth 0/9, eth 0/10, eth 0/11,
eth 0/12
VLAN
--------------------
1
2
3
Type
---------------
enet
enet
MTU
--------------
1500
1500
The following is an example of the show vlan name command that displays VLAN 2 (accounting VLAN)
information:
>enable
#show vlan name accounting
VLAN
--------------------
2
VLAN
--------------------
2
Name
----------------
accounting
Type
----------------
enet
Status
-------------
active
MTU
-------------
1500
Ports
----------------
eth 0/1, eth 0/2