ADTRAN 1000R Series - Manual (Page 1215)

Command Reference Guide CA Profile Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1215
CA P ROFILE C ONFIGURATION C OMMAND S ET
To activate the Certificate Authority (CA) Profile Configuration mode, enter the crypto ca profile
command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#crypto ca profile MyProfile
Configuring New CA Profile MyProfile
(ca-profile)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect <#>
on page 28
do on page 32
end on page 33
exit on page 34
All other commands for this command set are described in this section in alphabetical order.
crl optional on page 1216
email address on page 1217
enrollment retry [count | period] on page 1218
enrollment terminal on page 1219
enrollment url on page 1220
fqdn on page 1221
ip-address on page 1222
password on page 1223
serial-number on page 1224
subject-name on page 1225