Watlow CLS200 - Manual (Page 22)

Chapter 1: System Overview CLS200 Series User’s Guide
6 Watlow Anafaze Doc.# 0600-3050-2000
Figure 1.2 CLS200 Special Inputs Parts List
If special inputs are ordered in the
controller part number, the following
is specified in the pa t description.
Special Input Type (Not required for thermocouple sensor inputs)
20 = RTD1: 0.1°, -100.0 to 275.0° C (-148.0 to 572.0° F) (Not available on CLS216)
21 = RTD2: 1°, -120.0 to 840.0° C (-184.0 to 1544.0° F) (Not available on CLS216)
43 = 0 to 10 mAÎ
(dc)
44 = 0 to 20mAÎ (dc)/4 to 20mAÎ (dc)
50 = 0 to 100mVÎ (dc)
52 = 0 to 500mVÎ (dc)
53 = 0 to 1VÎ (dc)
55 = 0 to 5VÎ (dc)
56 = 0 to 10VÎ (dc)
57 = 0 to 12VÎ (dc)
Start Channel
XX = Channel number XX
End Channel
XX = Channel number XX
Note:
Make sure the number of special inputs specif ed is equal to
the number of special inputs in the controller part number.
Uninstalled kits are available.
CLSSI _ _–_ _–_ _