Watlow DIN-A-MITE Style B - Manual

DIN-A-MITE ®
Style B
Solid-State Power Controller
User’s Manual
DIN-A-MITE Solid-State Power Controller
0600-0025-0005 Rev K Made in the USA
September 2013
Please consult this user’s manual when you
place your new DIN-A-MITE into service. It
contains all the necessary information to mount
and wire the product into the application. This
manual also contains all user-pertinent
specifications and semiconductor fusing
recommendations. Refer to national and local
electrical code safety guidelines whenever you
install electrical equipment.
This DIN-A-MITE product is capable of
switching up to 40 amps single-phase; 33 amps
3-phase, 2-leg; and 22 amps 3-phase, 3-leg at
600V
Å (ac). (See the output rating curve in the
specifications section of this manual.) The DIN-
A-MITE is electrically touch-safe, and includes
DIN rail or standard back panel mounting. An
optional shorted SCR (silicon controlled rectifier)
alarm feature is available on specific models.
UL
® 508-listed, C-UL ® and CE with filter.
The DIN-A-MITE solid-state power controller is
designed and manufactured by Watlow in
Winona, Minnesota.
1241 Bundy Boulevard, Winona, Minnesota USA 55987
Phone: +1 (507) 454-5300, Fax: +1 (507) 452-4507 http://www.watlow.com