Watlow CLS200 - Manual (Page 13)

Doc.# 0600-3050-2000 Watlow Anafaze xiii
List of Tables
2 Installation
Table 2.1—Cable Recommendations 22
Table 2.2—Power Connections 26
Table 2.3—Digital Output States and Values Stored in the Controller 36
Table 2.4—Digital Inputs States and Values Stored in the Controller 39
Table 2.5—TB18 Connections 40
Table 2.6—TB50 Connections for CLS204 and CLS208 41
Table 2.7—TB50 Connections for CLS216 42
Table 2.8—EIA/TIA-232 Connections 46
Table 2.9—RTS/CTS Pins in DB-9 and DB-25 Connectors 46
3 Using the CLS200
Table 3.1—Bar Graph Display Symbols 55
Table 3.2—Control Status Symbols on the Bar Graph and Single Loop Displays 56
Table 3.3—Alarm Type and Symbols 59
4 Setup
Table 4.1—Global Parameters 74
Table 4.2—Job Select Inputs 76
Table 4.3—Job Selected for Various Input States 76
Table 4.4—Firmware Option Codes 81
Table 4.5—Setup Loop Input 82
Table 4.6—CLS200 Input Types and Ranges 83
Table 4.7—Input Character Sets 84
Table 4.8—Input Reading Offset 85
Table 4.9—Display Formats 87
Table 4.10—Setup Loop Control Parameters 90
Table 4.11—Setup Loop Outputs 93
Table 4.12—Heat / Cool Output Types 94
Table 4.13—Setup Loop Alarms 99
Table 4.14—Manual I/O Test 103
5 Extruder Control
Table 5.1—Default Control Parameters for Fan Cool Output 109
Table 5.2—Default Control Parameters for Oil Cool Output 109
Table 5.3—Default Control Parameters for H2O Cool Output 109