Watlow CLS200 - Manual (Page 21)

CLS200 Series User’s Guide Chapter 1: System Overview
Doc.# 0600-3050-2000 Watlow Anafaze 5
CLS200 Parts List
You may have received one or more of the following compo-
nents. See Figure 2.1 on page 12 for CLS200 configuration
information.
• CLS200 series controller
• Controller mounting kit
• TB50 with 50-pin SCSI cable
• EIA/TIA-232 or EIA/TIA-485 communications cable
• Power supply with mounting bracket and screws
• Serial DAC (digital-to-analog converter)
• Special input resistors (installed in CLS200)
• User’s guide
Figure 1.1 CLS200 Part Numbering
Number of Loops
04 = 4 loops
08 = 8 loops
16 = 16 loops
Controller Type
1 = Standard EPROM
2 = Extruder applications
3 = Ramp/soak option
4 = Enhanced features option (includes cascade, PV retransmit, ratio, remote setpoint)
Terminal Board
0 = No terminal board accessory
1 = 18-terminal block mounted on unit, no SCSI cable required
2 = 50-pin terminal board, includes 3 ft. SCSI cable
Power Supply
0 = No power supply
2 = 120/240VÅ (ac), 50/60Hz panel mount power supply adapter
(5VÎ [dc] @ 4A, 15VÎ [dc] @ 1.2A) CE approved
SCSI Cables (for use with 50-pin terminal board)
0 = No special SCSI cable (3 ft. cable is included with 50-pin terminal board)
1 = 6 ft. SCSI cable
2 = 3 ft. right angle SCSI cable
3 = 6 ft. right angle SCSI cable )
Communications Cables (For EIA/TIA-232 communications with computer)
0 = No communications cable
1 = 10 ft. (3.0 m) communications cable, DB-9 female/bare wire
2 = 25 ft. (7.6 m) communications cable, DB-9 female/bare wire
3 = 50 ft. (15.2 m) communications cable, DB-9 female/bare wire
Serial Communications Jumper Settings
0 = EIA/TIA-232
1 = EIA/TIA-485
2 = EIA/TIA-485 terminated
Special Inputs (one or two digits)
(Standard unit is conf gured for thermocouples and -10 to 60mV linear inputs.
For other sensors, special inputs are required.
00 = Thermocouples and -10 to 60mV inputs only
XX = Number of current and voltage inputs. RTDs are not available on the CLS216. Include
leading zero as needed.
2_ _–_ _ _ _ _ _ ___