Extron Electronics SME 100 User Guide - Manual (Page 75)

Configuration Page
The Configuration page contains eight additional links to pages that are used to configure
the general settings of the SME 100. The "
Web-based Configuration Page " section on
page 84 presents a detailed overview of each configuration page. The following
configuration pages are available.
• System Settings Page
• Encoder Settings Page
• Live View Settings Page
• Port Settings Page
• Advanced Settings Page
• Security Page
• Firmware Upgrade Page
• Reset Page
File Management Page
The File Management page is accessed by selecting the File Management tab
(see figure 58).
Figure 58. File Management Page
The File Management page is used to upload files from a server or control PC to the
SME 100. The types of files that can be uploaded to the SME 100 include script, event,
image, custom web pages, and executable files. This page can be used to store important
files in a central location which allows for simpler system maintenance and system recovery.
a Add directory — This field is used to add new directories. Enter the desired directory
name into this field and click the Add Dir button to create a new directory. See the
" Adding Directories " section on page 71 for more information on creating directories.
b
Browse and upload file — Use this field to upload files to the SME 100. Click on the
Browse button and use the file browser to navigate to the location of file that will be
uploaded to the SME 100. Select the file and click Upload to place the file on the
SME 100. See " Uploading Files " on page 72 for more information on uploading files to
the SME 100.
NOTE: If the file uploaded to the SME 100 is larger than the available memory
shown in the Bytes Left field, a message appears notifying the user that not
enough free space is available to store the file.
SME 100 • Web-based User Interface Operation 69