Extron Electronics SME 100 User Guide - Manual (Page 147)

Command
ASCII Command
(host to unit) Response
(unit to host)
Additional Description
Encoder presets
Recall preset
3*X8#. 4RprX8# ] Recalls encode preset X8#.
Save preset 4*X8#, 4SprX8# ] Saves encode preset X8#.
Delete/clear preset E X4*X8# PRST } Prst X4*X8# ] Clears encode preset X8# and
sets encode preset X8# name
to [unassigned].
Encoder preset name
Write name
E 4*X8# *X1$ PNAM } PNAM 4*X8# *X1$ ] Set the name ( X1$ ) for encode
preset X8# .
View name E 4*X8# PNAM } X1$ ] View the name of encode
preset X8#.
E X4*X8# PRST } Prst X4*X8# ] Clears encode preset X8# and
sets encode preset X8# name
to [unassigned].
NOTES: • To restore a default encode preset name, a single space character should be entered for X1$ ;
• Unassigned presets = "[unassigned]" valid only for existing presets.
Audio
Audio mute
Mute on
1Z Amt1 ] Mute selected input.
Mute off 0Z Amt0 ] Unmute selected input.
View Z X1) ] View mute status.
Audio gain and attenuation
Set gain
X2# G Aud X2# ] Set gain to X2#.
Set attenuation X2$ g Aud X2$ ] Set attenuation to X2$.
Increment audio level + G Aud X2& ] Increase the audio level.
Decrement audio
level − G Aud X2& ] Decrease the audio level.
View G X2& ] View current audio level.
Audio delay
NOTE: Setting the audio delay to zero disables the audio delay.
Set audio delay E X4@ ADLY } Adly X4@ ] Set audio delay to X4@.
View E ADLY } X4@ ] View audio delay value.
NOTES:
X1) = Off (disable) and On (enable) 0 = Off or disable, 1 = On or enable
X1$ = Text label / Preset name Up to 16 characters
X2# = Audio gain adjustment 0 to 15 dB
X2$ = Audio attenuation 0 to 15 dB
X2& = Audio level adjustment -15 to +15 dB
X4@ = Audio delay 0 through 999 ms
X8# = Encode presets 1 through 16 (two digit response with 0 padding)
SME 100 • Remote Communication and Control 141