Extron Electronics SME 100 User Guide - Manual (Page 37)

Picture Control Menu
The Picture Control menu is used to adjust the video image for the currently selected
input. Figure 18 and the information that follows provides an overview of the submenus and
the options that are available.
Menu
PICTURE
CONTROL
H POS V
00000 00000
H SIZE V
0640 0480
BRIGHT CONT
064 064
Next Next DETAIL
64
Next
Next
Brightness
Adjust the black
level of the input. Contrast
Adjust the range
of the light and
dark values for
the image.
COLOR TINT
064 064
Color
Adjust the color
intensity. Tint
Adjust the color
appearance for
the image.
INPUT
CONFIG
Detail
Adjust the amount
of sharpness and
noise reduction
applied to the image.
ZOOM
100%
Zoom
Adjust the size of
the image while
keeping the aspect
ratio constant.
Horizontal Position
Select a horizontal
position for the left
edge of the active
video. Vertical Position
Select a vertical
position for the top
edge of the active
video. Horizontal Size
Select a horizontal
size for the active
video. Vertical Size
Select a vertical
size for the active
video.
Next Next Next
Figure 18. Picture Control Submenu Overview
• H Pos (horizontal position) and V Pos (vertical position) — This submenu is used
to set the horizontal and vertical position of the active video for the selected input.
To use this submenu:
• Rotate the horizontal ([) Adjust knob to change the horizontal position of the video
for the selected input. The selected value relates to the left edge of the active video.
The default is
0 .
• Rotate the vertical ({) Adjust knob to change the vertical position of the video for
the selected input. The selected value relates to the top edge of the active video.
The default is
0 .
• H Size (horizontal size) and V Size (vertical size) — This submenu is used to set
the horizontal and vertical size of the active video for the selected input.
To use this submenu:
• Rotate the horizontal ([) Adjust knob to change the horizontal size of the video for
the selected input. The range of settings is dependent on the output resolution.
• Rotate the vertical ({) Adjust knob to change the vertical size of the video for the
selected input. The range of settings is dependent on the output resolution.
• Bright (brightness) and Cont (contrast) — This submenu is used to adjust the
brightness and contrast of the active video for the selected input.
To use this submenu:
• Rotate the horizontal ([) Adjust knob to change the brightness of the video for the
selected input. The range of settings is
0 to 127 . The default is 64 .
• Rotate the vertical ({) Adjust knob to change the contrast of the video for the
selected input. The range of settings is
0 to 127 . The default is 64 .
SME 100 • Front Panel Operation 31