Extron Electronics SME 100 User Guide - Manual (Page 150)

Command
ASCII Command
(host to unit) Response
(unit to host)
Additional Description
Port Assignment
NOTES:
• Duplicate port# assignments are not permitted (for example, the telnet and web port assignment cannot
be the same) and will return the E13 error.
• Remapping of port# assignments must be to ports 1024 or higher (unless resetting to the default port
number or disabling the port by setting it to 0).
Telnet port
Set telnet port map
E [port#]MT } Pmt[port#]] Set the telnet port.
Reset telnet port map E 23MT } Pmt 00023 ] Reset the telnet port to the
default value (23).
Disable telnet port E 0MT } Pmt 00000 ] Disable the telnet port.
View telnet port map E MT } [port#]] View the currently set telnet
port.
Web port
Set web port map
E [port#]MH } Pmh[port#]] Set the web port.
Reset web port map E 80MH } Pmh 00080 ] Reset the web port to the
default value (80).
Disable web port E 0MH } Pmh 00000 ] Disable the web port.
View web port map E MH } [port#]] View the currently set web port.
SNMP port
Set SNMP port map
E A[port#]PMAP } Pmap A[port#]] Set the SNMP port.
Reset SNMP port
map E A 161PMAP } Pmap A 00161 ] Reset the SNMP port to the
default value (161).
Disable SNMP port E A 0PMAP } Pmap A 00000 ] Disable the SNMP port.
View SNMP port map E A PMAP } [port#]] View the currently set SNMP
port.
SSH port
Set SSH port map
E B[port#]PMAP } Pmap B[port#]] Set the SSH port.
Reset SSH port map E B 22PMAP } Pmap B 00022 ] Reset the SSH port to the
default value (22).
Disable SSH port E B 0PMAP } Pmap B 00000 ] Disable the SSH port.
View SSH port map E B PMAP } [port#]] View the currently set SSH
port.
SSL port
Set SSL port map
E S[port#]PMAP } Pmap S[port#]] Set the SSL port.
Reset SSL port map E S 443PMAP } Pmap S 00443 ] Reset the SSL port to the
default value (443).
Disable SSL port E S 0PMAP } Pmap S 00000 ] Disable the SSL port.
View SSL port map E S PMAP } [port#]] View the currently set SSL port.
SME 100 • Remote Communication and Control 144