Using the, Picture adjustments – Extron Electronics SME 100 User Guide User Manual
Page 142
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
Picture Adjustments
Video mute
Enable blanking
1B
Vmt1 ]
Blanks selected input.
Disable blanking
0B
Vmt0 ]
Displays selected input.
View
B
X1) ]
View the blanking status.
Color
Specify a value
E X1% COLR }
Colr X!*X1% ]
Sets color level to X1%.
Increment value
E + COLR }
Colr X!*X1% ]
Increments color level.
Decrement value
E − COLR }
Colr X!*X1% ]
Decrements color level.
View
E COLR }
X1% ]
View current setting.
Tint
Specify a value
E X1% TINT }
Tint X!*X1% ]
Sets tint level to X1%.
Increment value
E + TINT }
Tint X!*X1% ]
Increments tint level.
Decrement value
E − TINT }
Tint X!*X1% ]
Decrements tint level.
View
E TINT }
X1% ]
View current setting.
Contrast
Specify a value
E X1% CONT }
Cont X!*X1% ]
Sets contrast level to X1%.
Increment value
E + CONT }
Cont X!*X1% ]
Increments contrast level.
Decrement value
E − CONT }
Cont X!*X1% ]
Decrements contrast level.
View
E CONT }
X1% ]
View current setting.
Brightness
Specify a value
E X1% BRIT }
Brit X!*X1% ]
Sets brightness level to X1%.
Increment value
E + BRIT }
Brit X!*X1% ]
Increments brightness level.
Decrement value
E − BRIT }
Brit X!*X1% ]
Decrements brightness level.
View
E BRIT }
X1% ]
View current setting.
Detail filter
Specify a value
E X1% HDET }
Hdet X!*X1% ]
Set the detail level to X1%.
Increment value
E + HDET }
Hdet X!*X1% ]
Increase the detail level.
Decrement value
E − HDET }
Hdet X!*X1% ]
Decrease the detail level.
View
E HDET }
X1% ]
View current setting.
Horizontal shift
Specify a value
E X1^ HCTR }
Hctr X!*X1^ ]
Set horizontal centering to X1^.
Increment value
E + HCTR }
Hctr X!*X1^ ]
Shift window right.
Decrement value
E − HCTR }
Hctr X!*X1^ ]
Shift window left.
View
E HCTR }
X1^ ]
View current setting.
NOTES:
X!
= Input selection
1 through 3 (2 and 3 applicable for EDID only)
X1)
= Off (disable) and On (enable)
0 = Off or disable, 1 = On or enable
X1%
= Picture adjustment
0 through 127 (default = 64)
X1^
= Horizontal and Vertical position
Default range depends on output resolution
SME 100 • Remote Communication and Control
136