Extron Electronics SME 100 User Guide - Manual (Page 88)

User and Input Presets
There are two types of presets on this page.
• User Presets — User presets are used when a shortcut is needed to quickly recall a
group of settings that relate to the current content or current input.
The User Presets panel is used to recall and save user presets. Saving a user preset
saves the current set of image parameters for the currently selected input. Recalling a
user preset recalls and applies a saved preset to the currently selected input. Each input
has 16 available user presets that are used to recall or save settings.
The table below details the settings that are saved and recalled in a user preset.
User Preset Saved Settings
Web Page
Saved Settings
Encoder Settings
Configuration
Aspect Ratio
Control
Horizontal Position Color
Vertical Position Tint
Horizontal Size Brightness
Vertical Size Contrast
Detail Zoom
• Input Presets — Input presets are used to define input and picture control settings that
can be saved for each source within a system so that they can be recalled whenever
the source is active. Unlike user presets, input presets save parameters that can be
recalled only on the source that was active when the preset was saved.
The Input Presets panel is used to recall and save input presets. Saving an input preset
saves the current set of input parameters for the current output stream. Recalling an
input preset recalls and applies a saved preset to the current output stream. Each input
has 128 available inputs presets that are used to recall or save settings.
The table below details the settings that are saved and recalled in an input preset.
Input Preset Saved Settings
Web Page
Saved Settings
Encoder Settings
Configuration Input type
Aspect Ratio
Control
Horizontal Position Zoom
Vertical Position Horizontal Start
Horizontal Size Vertical Start
Vertical Size Pixel Phase
Detail Total Pixels
Color Horizontal Active Pixels
Tint Vertical Active Lines
Brightness Input Preset Name
Contrast
The sections on the next page explain how to save, recall, and rename presets.
SME 100 • Web-based User Interface Operation 82