beautypg.com

Extron Electronics SME 100 User Guide User Manual

Page 137

background image

X11$

=

IP address:

xxx.xxx.xxx.xxx

Leading zeros are optional and are suppressed in returned values.
Factory default IP address:

192.168.254.254

Factory default gateway IP address:

0.0.0.0

Factory default DNS server IP address:

0.0.0.0

Factory default multicast IP address:

239.199.188.138

Valid multicast IP addresses:

225.0.0.0

through

239.255.255.255

X11*

=

Hardware MAC address:

00-05-A6-xx-xx-xx

X11(

=

Subnet mask:

xxx.xxx.xxx.xxx

Leading zeros are optional and are suppressed in returned values.
Factory default subnet mask:

255.255.0.0

X12@

=

Verbose / response mode

NOTE: If tagged responses are enabled, all commands will return the

constant string and the data, similar to the response received when
setting a value. Example: the command E CN } returns Ipn • X11@ ]

as a response.

0 = Clear / none (default for telnet connections)
1 = Verbose mode (default for RS-232 host control)
2 = Tagged responses for queries
3 = Verbose mode and tagged responses for queries

X12%

=

Baud rate: 300, 600, 1200, 1800, 2400, 4800, 9600 (default), 19200, 38400,
57600, 115200

X12^

=

Parity:

Odd, Even, None (default), Mark, Space

Only use the

first letter.

X12&

=

Data bits: 7, 8 (default)

X12*

=

Stop bits: 1 (default), 2

X12(

=

Port type
0 = RS-232 (default)

X13)

=

Flow control:

Software, None (default)

Only use the

first letter.

X13!

=

Data pacing (specified in milliseconds (ms) between bytes): 0 through 1000

Default = 0 ms

For host ports, this value is ignored and will always return 0.

X13#

=

Password (up to 12 characters)

All readable characters are permitted except "/", "\", "

|

", and "*".

No blank characters (spaces) can be used in the password.

Passwords are case sensitive.

NOTES:

An administrator password must be set before assigning user
passwords. If an administrator password has not first been set, the

E14

error will be returned.

If the administrator password is removed, all user created profiles
and passwords are disabled.

SME 100 • Remote Communication and Control

131