Accessing the menus on the lcd display, Presets menu, Accessing the – Extron Electronics SME 100 User Guide User Manual
Page 29: Menus on the lcd display, The menu and next buttons, see the
Accessing the Menus on the LCD Display
To access the primary menus and submenus using the front panel, follow the procedure
below while referring to figure 15 on the previous page and the "
"
section on page 11.
1.
Press the Menu button to access the primary configuration menus. The first menu
(
Presets
) is shown on the LCD display.
2.
To choose a primary configuration menu, repeatedly press the Menu button until the
desired menu is shown on the LCD display.
3.
When the desired primary configuration menu is shown on the LCD display, repeatedly
press the Next button to cycle through its submenus.
NOTE: To return to the primary configuration menus from within a submenu,
press the Menu button.
4.
When the desired submenu is shown on the LCD display, rotate the horizontal ([) or
vertical ({) Adjust knob clockwise or counterclockwise to cycle through the configuration
options.
5.
When the desired configuration option is shown on the LCD display, do one of the
following to implement it.
•
Press the Next button to display another submenu.
•
Press the Menu button repeatedly until the
Exit Menu? Press NEXT
menu
appears, then press the Next button to return to the default display cycle
(see the "
" section on page 18 to see the default
display cycle).
•
Do nothing more and wait until the LCD display returns to the default display cycle
(approximately 30 seconds).
NOTE: From any primary menu or submenu, after 30 seconds of inactivity the
SME 100 saves all configured settings and times out to the default display
cycle.
Presets Menu
The
Presets
menu is used to save or recall
User Encoder and User Streaming presets.
Figure 16 provides an overview of the presets submenus and the options that are available.
PRESETS
USER RECALL
N/A
USER SAVE
N/A
ENCODE RCALL
N/A
ENCODE SAVE
N/A
Next
Next
Next
Next
•
N/A
•
1 through 16
•
N/A
•
1 through 16
•
N/A
•
1 through 16
•
N/A
•
1 through 16
Next
Default
Cycle
Menu
STREAM RCALL
N/A
STREAM SAVE
09 STREAM PR
Next
•
N/A
•
1 through 16
•
N/A
•
1 through 16
Next
NOTE: Use either Adjust knob to
select a submenu option.
Figure 16.
Presets Menu Overview
SME 100 • Front Panel Operation
23