Extron Electronics SME 100 User Guide - Manual (Page 138)

X13$ = Daylight savings time
0 = Off (ignore)
1 = U.S.A.
2 = Europe
3 = Brazil
X14! = Check password
The actual password is not shown.
If a password is set, four asterisks (****) are returned.
If a password is not set, nothing is returned.
X14( = Default name: shows the default name of the unit using the model name and
the last three pairs of the MAC address.
Example:
SME-100-HD/SD-00-02-3D
X15@ = Connection security level
NOTES:
• The response is returned as two digits.
• A leading zero is used for values lower than 10.
00 = Anonymous
01-10 = Extended security levels (1 through 10)
11 = User (viewer)
12 = Administrator
X16( = IP connection timeout: 1 through 65000 (default = 30 = 300 seconds)
NOTES:
• Applicable to Ethernet connections only.
• The selected number multiplied by 10 determines the number of
seconds required for a connection timeout.
• If no data is received during the connection timeout period, the
Ethernet connection is closed.
• The response is returned as five digits with leading zeros.
• Connection timeouts can be set on the RS-232 port when using
the global timeout commands only. Using the current port timeout
commands returns the
E13 error.
X18! = Text (up to 64 characters)
SME 100 • Remote Communication and Control 132