beautypg.com

Extron Electronics SME 100 User Guide User Manual

Page 34

background image

The table on the next page details the resolutions and refresh rates that are available for
EDID emulation and supported by the SME 100.

NOTES:

There are 24 predefined EDID and 6 custom EDID available.

Custom EDID is captured from devices attached to the 15-pin HD or DVI
buffered loop connectors (see the "

Rear Panel Features

" section on page 12)

and stored in the selected custom EDID slot. Custom 1, 2, and 3 capture EDID
from the 15-pin HD buffered loop connector. Custom 4, 5, and 6 capture EDID
from the DVI buffered loop connector.

For information on using the web-based user interface to apply or create a
custom input EDID, see the "

Advanced Settings Page

" section on page 105.

For information on using SIS commands to apply or create a custom input
EDID, see "

Input EDID (VGA and DVI)

" on page 133 of the "

Command and

Response Table for SIS Commands

" section.

If EDID is not captured, the custom EDID resolution and refresh rate defaults to
1024x768 @ 60

Hz.

SME 100 • Front Panel Operation

28