Extron Electronics SME 100 User Guide - Manual (Page 109)

Port Settings Page
The Port Settings page is accessed by clicking on the Port Settings link on the left
sidebar of the Configuration page (see figure 80).
1
2
Figure 80. Port Settings Page
The Port Settings page is used to change the settings of the serial port and the network
port. These ports are used to communicate with the SME 100 using a control PC or control
device.
a
Serial Port Settings panel
NOTE: After all of the necessary changes have been made to the following
configuration options in this panel, click the Submit button to save the configuration
settings. Clicking the Cancel button or navigating to a different web page clears
any changes that were made.
• Serial Port — This field displays the serial port number of the SME 100. The serial
port number of the SME 100 is always
1 .
• Port Type — This field displays the type of serial port type on the SME 100. The
type of serial port on the SME 100 is always
RS-232 .
• Data Bits — This drop-down menu is used to set the number of data bits that are
used for communication with the SME 100. The default is
8 .
SME 100 • Web-based Configuration Page 103