Extron Electronics SME 100 User Guide - Manual (Page 52)

Web-based User
Interface Operation
This section provides information about:
• Overview of the Web-based User Interface
• SME 100 Media Players
• Accessing the Web-based User Interface
• Live View Page
• Installing Media Players
• Displayed Video Image Adjustments
• Status Page
• Configuration Page
• File Management Page
• Backup / Restore Page
• Control Page
Overview of the Web-based User Interface
The web-based user interface can configure and operate the SME 100. The user interface
is accessed by opening a web browser on a control PC or viewing device and entering the
IP address of the SME 100 (default IP address is 192.168.254.254) into the address bar.
The following list outlines the main features of the user interface.
• Full configuration of the SME 100 from a remote location using a control PC.
• Control and actively monitor the SME 100 from a remote location using a control PC.
• An embedded video window is provided by the user interface that is used for viewing
live streams.
• Ability to update the firmware of the SME 100.
• When the SME 100 user interface is accessed with a web browser, a window is
provided that is used to view media being streamed through the SME 100.
SME 100 • Web-based User Interface Operation 46