Extron Electronics SME 100 User Guide - Manual (Page 151)

Command
ASCII Command
(host to unit) Response
(unit to host)
Additional Description
RTP port (streaming media port selection)
Set RTP range port
map
E R[start port#]*
[end port#]PMAP }
Pmap R[start port#]*
[end port#]]
Set the RTP port range.
Reset RTP range
port map E R[port#]PMAP } Pmap R 50000*50999 ] Reset the RTP port range to
default (50000-50999).
Disable RTP ports E R 0PMAP } Pmap R 00000*00000 ] Disable all RTP ports.
View RTP range port
map E R PMAP } [start port#]*
[end port#]]
View the currently set RTP port
range.
RTSP port (streaming media control port selection)
Set RTSP port map
E C[port#]PMAP } Pmap C[port#]] Set the RTSP port.
Reset RTSP port
map E C 554PMAP } Pmap C 00554 ] Reset the RTSP port to the
default value (554).
Disable RTSP port E C 0PMAP } Pmap C 00000 ] Disable the RTSP port.
View RTSP port map E C PMAP } [port#]] View the currently set RTSP
port.
Multicast port
Set multicast port
map
E M[port#]PMAP } Pmap M[port#]] Set the multicast port.
Reset multicast port
map E M 6000PMAP } Pmap M 06000 ] Reset the multicast port to the
default value (6000).
Disable multicast port E M 0PMAP } Pmap M 00000 ] Disable the multicast port.
View multicast port
map E M PMAP } [port#]] View the currently set multicast
port.
FTP port
Set FTP port map
E F[port#]PMAP } Pmap F[port#]] Set the FTP port.
Reset FTP port map E F 21PMAP } Pmap F 00021 ] Reset the FTP port to the
default value (21).
Disable FTP port E F 0PMAP } Pmap F 00000 ] Disable the FTP port.
View FTP port map E F PMAP } [port#]] View the currently set FTP port.
TFTP port
Set TFTP port map
E T[port#]PMAP } Pmap T[port#]] Set the TFTP port.
Reset TFTP port map E T 69PMAP } Pmap T 00069 ] Reset the TFTP port to the
default value (69).
Disable TFTP port E T 0PMAP } Pmap T 00000 ] Disable the TFTP port.
View TFTP port map E T PMAP } [port#]] View the currently set TFTP
port.
SME 100 • Remote Communication and Control 145