Using telnet – Extron Electronics SME 100 User Guide User Manual
Page 129
Using Telnet
Follow the procedure below to run Telnet.
NOTE: To activate and run Telnet in Microsoft
®
Windows
®
7, select
Start
> Help and Support
or see the "Windows 7 Help and How-to"
documentation available online.
1.
From the desktop, select
Start > Run
.
2.
The Run window appears. In the
Open
field, type
telnet
and click
OK
(see figure 98).
Figure 98.
Run Program Window
3.
The Telnet application appears. At the telnet prompt, type
open
followed by the IP
address of the SME 100 and the port number (default port is 23). Then press
See figure 99 for an example.
Microsoft Telnet> open 10.13.193.140 23
Connecting To 10.13.193.140...
Figure 99.
Telnet Open Command
4.
The Telnet application is connected to the SME 100 when the window displays the
copyright message (see figure 100). SIS commands can now be sent to the SME 100.
Figure 100.
Telnet Connected to SME 100
SME 100 • Remote Communication and Control
123
- AVTrac Corner Cut Solution (2 pages)
- AVTrac Demonstration Kit (2 pages)
- AVTRac End Ramp and Cable Pass-Through Kits (1 page)
- AVTrac Extension Kit (15 pages)
- 1U and 2U Rack Plate (1 page)
- Under-Desk Mounting Bracket (1 page)
- AAP Wiring Guide 68-1054-01 (1 page)
- AAP Wiring Guide 68-1052-01 (1 page)
- AAP Wiring Guide (XLR connectors) (1 page)
- AAP 314 (1 page)
- AAP 301 (1 page)
- AAP Wiring Guide 68-1055-01 (1 page)
- AAP Wiring Guide 68-1058-01 (1 page)
- AAP Wiring Guide 68-1059-01 (1 page)
- AAP-MAAP Rev. A (1 page)
- AAP-MAAP Rev. D (1 page)
- MD Floor Box AAP Bracket Kit AAP 100 MD (1 page)
- AC 100 Power Module Series (1 page)
- AAP 103 Extron Ackerman AKM UK Faceplate Kit (1 page)
- ACMP 100 (2 pages)
- Active Audio AAP (1 page)
- AKM UK Series (4 pages)
- Audio AAP Wiring Guide (1 page)
- Audio Connector Rev. A (2 pages)
- Audio Connector Rev. G (1 page)
- AVTrac Extra Channel Kit (2 pages)
- AVTrac Raceway Transition (2 pages)
- AVTrac Retrofit Transition Adapter (2 pages)
- AVTrac Trim Ring-Rough-in Adapter (2 pages)
- AVTrac Above Floor (1 page)
- BB 1 (2 pages)
- BB 1000M (2 pages)
- BB 700M (2 pages)
- BB 710M (2 pages)
- Blank Rack Panel (1 page)
- BNC to 15-Pin HD (1 page)
- BNC-5 RC Termination (1 page)
- Cable Cubby 1200 (6 pages)
- Cable Cubby 200 (18 pages)
- Cable Cubby 300C (27 pages)
- Cable Cubby 500 (6 pages)
- Flexible Conduit Kit (2 pages)
- Cable Cubby Lid and Trim Ring Replacement Kit (for 300C, 300S, 600, 800) (1 page)
- Cable Cubby Setup Guide (4 pages)
- Cable Cubby Single Space AAP Bracket Kit (1 page)