Embedding the sme 100 stream, See the – Extron Electronics SME 100 User Guide User Manual
Page 107
Embedding the SME 100 Stream
The Embed VLC / SMP / QuickTime panel (see e in figure
) on the Live View Settings
page creates HTML code that can be placed into customized web pages.
Before placing
this code into a web page, make sure that all of the settings on the SME 100 have been
properly configured and that the stream is viewable from the Live View page.
NOTES:
•
Embedded streams will not work if a
user password is required to access the
stream.
•
To view the stream, a remote viewer must install the same media player plugin that is
being used by the SME 100 for streaming.
•
This procedure uses a Microsoft
®
Windows
®
operating system and may vary
depending on the operating system used.
To create a basic web page that presents a SME 100 stream:
1.
From the desktop, select
Start > All Programs > Accessories > Notepad
. This
opens a new Microsoft Notepad document that can be used to create custom web
pages. Leave this document open on the desktop.
2.
If necessary, access the web-based user interface of the SME 100 (see the
"
Accessing the Web-based User Interface
" section on page 47) and navigate
to the
page (see page 98).
3.
Copy the HTML code, located in the Embed VLC / SMP / QuickTime panel
(see figure 76).
Figure 76.
Embed VLC / SMP / QuickTime Panel
4.
Paste the HTML code into the open Notepad document. Figure 77 shows the code
pasted into a Notepad document that contains a basic web page title and heading.
Figure 77.
Embed VLC / SMP / QuickTime Notebook Document
5.
After the Notepad document has been edited as necessary, select
File > Save As
from the Notepad menu bar.
SME 100 • Web-based Configuration Page
101