Rainbow Electronics DS26519 User Manual
Page 25
DS26519 16-Port T1/E1/J1 Transceiver
25 of 310
NAME PIN
TYPE
FUNCTION
RECEIVE FRAMER
RSER1 D12
RSER2 E12
RSER3 J5
RSER4 AA4
RSER5 Y10
RSER6 AA10
RSER7 B18
RSER8 T20
RSER9 L17
RSER10 L16
RSER11 B1
RSER12 K7
RSER13 J4
RSER14 P7
RSER15 H13
RSER16 M16
Output
Received Serial Data 1 to 16.
Received NRZ serial data. Updated on rising
edges of RCLKn when the receive-side elastic store is disabled. Updated on the
rising edges of RSYSCLKn when the receive-side elastic store is enabled.
When IBO mode is used, the RSERn pins can output data for multiple framers.
The RSERn data is synchronous to RSYSCLKn. See Section
and
RCLK1 J9
RCLK2 H7
RCLK3 J8
RCLK4 H6
RCLK5 T15
RCLK6 U19
RCLK7 V20
RCLK8 W20
RCLK9 D3
RCLK10 C2
RCLK11 H3
RCLK12 G3
RCLK13 T17
RCLK14 R15
RCLK15 T18
RCLK16 N15
Ouput
Receive Clock.
A 1.544MHz (T1) or 2.048MHz (E1) clock that is used to clock
data through the receive-side framer. This clock is recovered from the signal at
RTIPn and RRINGn. RSERn data is output on the rising edge of RCLKn. RCLKn
is used to output RSERn when the elastic store is not enabled or IBO is not used.
When the elastic store is enabled or IBO is used, the RSERn is clocked by
RSYSCLKn.
RSYSCLK1 U18
RSYSCLK2 G9
RSYSCLK3 J6
RSYSCLK4 W7
RSYSCLK5 AB7
RSYSCLK6 AB10
RSYSCLK7 C19
RSYSCLK8 AA22
RSYSCLK9 G6
RSYSCLK10 P18
RSYSCLK11 F2
RSYSCLK12 AB2
RSYSCLK13 P8
RSYSCLK14 R7
RSYSCLK15 G15
RSYSCLK16 T19
Input
Receive System Clock 1 to 16.
1.544MHz, 2.048MHz, 4.096MHz, 8.192MHz, or
16.384MHz receive backplane clock. Only used when the receive-side elastic
store function is enabled. Should be tied low in applications that do not use the
receive-side elastic store. Multiple of 2.048MHz is expected when the IBO mode
is used.