Epson S1C33210 - Manual (Page 85)

8 ELECTRICAL CHARACTERISTICS
S1C33210 PRODUCT PART EPSON A-71
8.4 Current Consumption
(Unless otherwise specified: V DD =2.7V to 3.6V, V SS =0V, Ta=-40
°
C to +85
°
C)
Item Symbol Condition Min. Typ. Max. Unit
∗
Operating current I DD1 When CPU is operating 20MHz – 27 37 mA 1
33MHz – 48 64
50MHz – 64 90
I DD2 HALT mode 20MHz – 16 20 mA 2
33MHz – 28 37
50MHz – 37 55
I DD3 HALT2 mode 20MHz – 6 10 mA 3
33MHz – 9 15
50MHz – 13 20
I DD4 SLEEP mode – 1 30
µ
A 4
Clock timer operating current I DDCT When clock timer only is operating
OSC1 oscillation: 32kHz – 7 – µ A 5
Analog power current
(Unless otherwise specified: V SS =0V, Ta=-40
°
C to +85
°
C)
Item Symbol Condition Min. Typ. Max. Unit
∗
A/D converter operating current AI DD1 V DD =AV DD =2.7V to 3.6V – 500 800 µ A 6
Current consumption measurement condition: V IH =V DD , V IL =0V, output pins are open.
∗
note) No. OSC3 OSC1 CPU Clock timer Other peripheral circuits
1 On Off Normal operation ∗ 1 Stop Stop
2 On Off HALT mode Stop Stop
3 On Off HALT2 mode Stop Stop
4 Off Off SLEEP mode Stop Stop
5 Off On HALT mode Run Stop
6 On Off HALT mode Stop A/D converter only operated,
conversion clock frequency=2MHz
∗
1: The values of current consumption while the CPU is operating were measured when a test program that
consists of 55% load instructions, 23% arithmetic operation instructions, 1% mac instruction, 12% branch
instructions and 9% ext instruction is being executed in the built-in ROM continuously.