Epson S1C33210 - Manual (Page 147)

II CORE BLOCK: CPU AND OPERATING MODE
S1C33210 FUNCTION PART EPSON B-II-2-5
HEX
No.
Vector number
(Hex address)
Exception/interrupt name Exception/interrupt factor
IDMA
Ch.
Priority
38 56(Base+E0) Serial interface Ch.0 Receive error – High
39 57(Base+E4) Receive buffer full 23 ↑
3A 58(Base+E8) Transmit buffer empty 24
59 reserved – –
3C 60(Base+F0) Serial interface Ch.1 Receive error –
3D 61(Base+F4) Receive buffer full 25
3E 62(Base+F8) Transmit buffer empty 26
63 reserved – –
40 64(Base+100) A/D converter A/D converter, end of conversion 27
41 65(Base+104) Clock timer Falling edge of 32 Hz, 8 Hz, 2 Hz or 1 Hz signal
1-minuet, 1-hour or specified time count up
–
66–67 reserved – –
44 68(Base+110) Port input interrupt 4 Edge (rising or falling) or level (High or Low) 28
45 69(Base+114) Port input interrupt 5 Edge (rising or falling) or level (High or Low) 29
46 70(Base+118) Port input interrupt 6 Edge (rising or falling) or level (High or Low) 30 ↓
47 71(Base+11C) Port input interrupt 7 Edge (rising or falling) or level (High or Low) 31 Low
∗
Base = Set value in the TTBR register (0x48134 to 0x48137); 0xC00000 by default.