Epson S1C33210 - Manual (Page 375)

III PERIPHERAL BLOCK: INPUT/OUTPUT PORTS
S1C33210 FUNCTION PART EPSON B-III-9-13
Key Input Interrupt
The key input interrupt circuit has two interrupt systems (FPK1 and FPK0) and a port group can be selected for
generating each interrupt factor.
The interrupt condition can also be set by software.
Figure 9.4 shows the configuration of the port input interrupt circuit.
Internal data bus
CP0, P04, P24
CP4, K63, P03, P23
K52, K62, P02, P22
K50
K60
P00
P20
Input comparison
register SCPK0
Input mask
register SMPK0
Address
Address
K51, K61, P01, P21
K50, K60, P00, P20
Input port selection
SPPK0
FPK0
Interrupt
request
Interrupt signal
generation
FPK0 system
K63, CP3, P07, P27
K62, CP2, P06, P26
K60
CP0
P04
P24
Input comparison
register SCPK1
Input mask
register SMPK1
Address
Address
K61, CP1, P05, P25
K60, CP0, P04, P24
Input port selection
SPPK1
FPK1
Interrupt
request
Interrupt signal
generation
FPK1 system
Figure 9.4 Configuration of Key Input Interrupt Circuit