Epson ACTIONPC 5000 - Manual

NEW EPSON ActionPC 5000, ActionTower 5000
speed light power light power light hard hard disk drive bays drive bays reset button reset button
I
diskette drive
button
inlet
AC outlet MOUSE COM2 VGA
power
power light
speed light
hard disk
access light
drive bays
PARALLEL
COM1
MOUSE
Km
AC Inlet
option skits
A C & l e t \ voltage switch
Computer Specifications
CPU and Memory
32-bit CPU
486SX/25 or /33; SX2/50 or /66;
DX/33, /40, or /50; DX2/50 or /66;
DX4/75 or /100; or Pentium™OverDrive™
processor
Green PC
energy saver
Energy Star compliant, low-power,
standby mode for the hard disk drive and
video signals sent by the computer to the
monitor; select timeout periods in SETUP;
in a standard configuration of one hard
disk drive and one diskette drive, system
consumes less than 30 watts in standby
mode
System speed Fast and slow processor speeds available;
fast is the speed of your processor and
slow is 8 MHz; 0 wait state memory access
at fast speed
Press Ctrl Alt and - to select slow speed or
Ctrl Alt and + to select fast speed
Memory
ROM
Video RAM
Shadow RAM
Memory
relocation
4MB or 8MB RAM standard on a SIMM;
expandable to 64MB using 1MB, 2MB,
4MB, 8MB, 16MB, and 32MB SIMMs;
SIMMs must be tin-plated, 72-pin, 32-bit
or 36-bit, fast-page mode type with an
access speed of 70ns or faster
128KB Phoenix@ system BIOS, video BIOS,
and SETUP program located in EPROM
on main system board
1MB DRAM on main system board;
expandable to 2MB using eight,
4 x 4 x 256, 20-pin DIP chips
Supports shadowing of system and video
BIOS ROM into RAM
Supports relocation of 256KB of memory
from A0000h to BFFFFh and D0000h to
EFFFFh to extended memory
8/94 NEW EPSON ActionPC 5000, ActionTower 5000 - 1