HEIDENHAIN TNC 306 Technical Manual - Manual (Page 63)

3–48
TNC 416/TNC 406/TNC 306 Handwheel input 3/99
10.2 Panel-mounted handwheel HR 130
The HR 130 is the panel-mount version of the HR 330 without axis keys, rapid traverse keys, etc. It
is connected to the logic unit directly or by extension cable.
The HR 130 is available in various versions (standard cable length 1 meter):
• Small knob, axial cable outlet: Id. Nr. 254 040 01
• Small knob, radial cable outlet: Id. Nr. 254 040 02
• Large knob, axial cable outlet: Id. Nr. 254 040 03
• Large knob, radial cable outlet: Id. Nr. 254 040 04
• Ergonomic knob, radial cable outlet:
Id. Nr. 254 040 05
(See also the "Dimensions" section in the Appendix)
Extension cable Id. Nr. 281 429 .. HR 130 Id. Nr. 254 040 ..
D-sub connector
(male) 9-pin D-sub connector
(female) 9-pin D-sub connector
(male) 9-pin
Housing Shield Housing Housing Shield
2 White 2 2 White
4 Brown 4 4 Brown
6 Yellow 6 6 Yellow
8 Green 8 8 Green
7 Gray 7