HEIDENHAIN TNC 306 Technical Manual - Manual (Page 37)

3–22
TNC 416/TNC 406/TNC 306 Power supply 3/99
4.2 Power supply for the visual display unit
BC 120
Mains supply voltage
Supply voltage range 85 V to 264 V
Fuse rating F 3.15 A
Frequency range 50 to 60 Hz
Power consumption 80 W
BC 110
X3 = Mains supply connection
Mains supply voltage 110 V 220 V
Supply voltage range 85V to 132 V 170V to 264 V
Fuse rating F 3.15 A F 3.15 A
Frequency range 50 to 60 Hz
Power consumption 70 W
Connection Assignment
L1 Live (BK)
N Neutral (BL)
Protective earth (GN/YL)
X4 = DC connections (only for BC 110, Id.-Nr. 254 740 01)
Pin Number Assignment
1 Do not use
2 Do not use
Power supply for integral fan:
The power supply for the fan must be connected separately to the BC 110 (Id.-Nr. 254 740 01).
The connection to the +24 V machine control voltage must be according to VDE 0550.
Permissible voltage range +18 to +28 V; power consumption 5 W at +24 V DC.
The power supply for the fan is taken internally from the main supply voltage.
BE 212
The BE 212 visual display unit is powered through the LE 306 (connector X9).
Danger of electrical shock!
The BE 212 and BC 110 generate high voltages.
Unplug the power cord before opening the housing.