HEIDENHAIN TNC 306 Technical Manual - Manual (Page 410)

7-120
TNC 416/TNC 406/TNC 306 PLC Modules for TNC 416/406 3/2000
4.12 Display Bar Chart (Module 9083)
Displays a bar chart in the screen window for the PLC status display on the specified line, with the
specified lengths and in the specified colors.
A bar chart can be displayed in the left half of each line in the PLC status window. In this mode the
ASCII text only appears in the right half of every line (19 characters max.).
Line 0
Line 1
Column 0 150 0 19
The operator must specify the line, maximum length (0...150), current length (<= maximum length)
and the colors of the bars or the margin and scale graduation (0...15). If the maximum length
exceeds 150 it is limited to 150. If current length exceeds maximum length then it is limited to the
maximum length.
The chart comprises a rectangular grid with the maximum length and height of the ASCII characters.
A scale graduation is shown at the top after every 10 units. The bar starts from the left hand edge of
the grid. The unused part of the grid is filled in with the background color.
Constraints:
- The height of the bar chart varies according to the size of the screen window, i.e. the current
operating mode, and cannot be modified.
The specified color refers to one of the machine parameters MP735x and can be seen from the
following table:
Operating mode „Machine“ Operating mode „Edit“
Color 0: MP736x.0 MP736x.0
Color 1: MP7354.0 MP7355.0
Color 2: MP7356.0 MP7356.0
Color 3: MP7352.0 MP7353.0
Color 4: MP7353.0 MP7352.0
Color 5: MP7357.0 MP7358.0
Color 6: MP7352.1 MP7353.1
Color 7: MP7354.3 MP7355.3
Color 8: MP7350 MP7358.1
Color 9: MP7357.1 MP7355.1
Color 10: MP7354.1 MP7356.2
Color 11: MP7356.2 MP7356.1
Color 12: MP7356.1 MP7355.2
Color 13: MP7354.2 MP7356.2
Color 14: MP7352.2 MP7353.2
Color 15: MP7351 MP7351