HEIDENHAIN TNC 306 Technical Manual - Manual (Page 273)

3/2000
TNC 416/TNC 406/TNC 306 List of machine parameters 5-25
Machine
parameter Function and input Change
via Reaction Page
4-92 MP7361 *
MP7361.0
MP7361.1
MP7361.2
MP7361.3
MP7361.4
MP7362 *
MP7362.0
MP7362.1
MP7362.2
MP7362.3
MP7365 *
MP7365.0
MP7365.1
MP7365.2
MP7365.3
MP7365.4
MP7365.5
MP7365.6
MP7365.7
Graphics: view in three planes
Background
$000000
Plan (Grating) $203038
Front and side view $203038
Axis cross and text $3F3F3F
Cursor $3F0000
Additional status-display in graphics window
Background graphics window
$080400
Background status display $0C0800
Status symbols $38240C
Status values $3F2C18
Colors of the oscilloscope
Background $000000
Channel 1 $003F3F
Channel 2 $3F3F00
Channel 3 $003F00
Channel 4 $3F1230
Reserved $000000
Grating $30200C
Cursor and text $3F3F3F
New MP in TNC 416 software 286 180-01
New MP in TNC 406 software 280 620-07
*) only TNC 416/406
3.11 Machining and program run
Machine
parameter Function and input Change
via Reaction Page
MP7410 ”Scaling factor” cycle effective in two or three
axes
Entry values: 0 or 1
0 = Effective in three axes
1 = Effective in working plane
123 4-87
MP7411 Rotation of coordinate system during datum shift
from datum table
Entry values: 0 or 1
0 = Rotate coordinate system
1 = No rotation
123 –