HEIDENHAIN TNC 306 Technical Manual - Manual (Page 11)

2-8
TNC 416/TNC 406/TNC 306 Software 3/2000
3 Software
The logic unit contains separate software for the NC section and the PLC section.
The software is identified by an 8-digit number. After the control is switched on, the NC and
PLC software numbers are displayed on the screen. The software number can also be directly requested
with the aid of the MOD function.
3.1 NC Software
3.1.1 NC Software number
The 8-digit NC software number identifies the control model, the dialog language
(language of the country) and the software version.
2 8 6 1 8 x -01
Software type
TNC 416
National language
0= English
1= English 2= English
German German German
French Swedish Czech
talian Finnish res.
Software version
2 8 0 6 2 x -01
Software type
TNC 406
National language
0= English
1= English 2= English
German German German
French Swedish Czech
Italian Finnish res.
Software version
2 6 0 0 3 x -01
Software type
TNC 306
National language
0= English
1= Czech
2= French
3= Italian
Software version
In addition to the above languages the TNC 306 can always use German, which may be
selected via machine parameter MP7230.