HEIDENHAIN TNC 306 Technical Manual - Manual (Page 52)

3/99
TNC 416/TNC 406/TNC 306 Visual display unit (VDU) 3–37
7 Visual disp lay unit (VDU)
The LE 406 is prepared for connecting the BC 110 CRT screen, the LE 306C for connecting the BE
212 CRT screen or BF 110 flat luminescent screen. The status is indicated by the Id.-Nr. on the ID
label (Id.-Nr. 270 641 for BE 212 and Id.-Nr. 270 642 for BF 110).
7.1 Connector assignment
X9 Visual display unit BE 212 and BF 110
X43 Visual display unit BC 110
Flange socket with female insert
Pin number BE 212 BF 110 BC 110 BC 120
1 0 V power supply – GND
R
2 +12 V power supply – Not used
G
3 Not used Not used Not used
B
4 +12 V power supply Not used Do not use
5 Not used Not used Not used Do not use
6 Not used Not used Not used GND
7 – Video R GND
8 0 V power supply GND GND
9 V SYNC V SYNC V SYNC Do not use
10 H SYNC1 – H SYNC1 GND
11 – 0 V Signal GND GND
12 0 V Signal – Not used Do not use
13 Video – Not used HSYNC
14 H SYNC 2 G VSYNC
15 CLOCK B Do not use
Housing Outer shield = Unit housing