HEIDENHAIN TNC 306 Technical Manual - Manual (Page 253)

3/2000
TNC 416/TNC 406/TNC 306 List of machine parameters 5-5
3 List of machine parameters
3.1 Measuring systems and machines
Machine
parameter Function and input Change
via Reaction Page
MP10 Active axes
Entry range:
1 to 15 (TNC 306)
% xxxxx (TNC 416/406)
Bit 0 X axis +0 = Not active
+1 = Active
Bit 1 Y axis +0 = Not active
+2 = Active
Bit 2 Z axis +0 = Not active
+4 = Active
Bit 3 4th axis +0 = Not active
+8 = Active
Bit 4 * 5th axis +0 = Not active
+16 = Active
RESET 4-5
MP31 Amplitude monitoring of the measuring
system signals
Entry range:
1 to 15 (TNC 306)
% xxxxx (TNC 416/406)
X +0 = Monitoring not active
+1 = Monitoring active
Y +0 = Monitoring not active
+2 = Monitoring active
Z +0 = Monitoring not active
+4 = Monitoring active
IV +0 = Monitoring not active
+8 = Monitoring active
V * +0 = Monitoring not active
+16 = Monitoring active
RESET 4-8
MP32 Frequency monitoring
Entry range:
1 to 15 (TNC 306)
% xxxxx (TNC 416/406)
X +0 = Monitoring not active
+1 = Monitoring active
Y +0 = Monitoring not active
+2 = Monitoring active
Z +0 = Monitoring not active
+4 = Monitoring active
IV +0 = Monitoring not active
+8 = Monitoring active
V * +0 = Monitoring not active
+16 = Monitoring active
RESET 4-9
*
only TNC 416/406