HEIDENHAIN TNC 306 Technical Manual - Manual (Page 219)

2/97
TNC 406/TNC 306 10 Handwheel 4-119
MP7670.0 Interpolation factor for HR 410 at smallest speed range
Input range: 0 to 10
MP7670.1 Interpolation factor for HR 410 at medium speed range
Input range: 0 to 10
MP7670.2 Interpolation factor for HR 410 at greatest speed range
Input range: 0 to 10
MP7671.0 % Factor from MP1020.x for feed rate with smallest speed range for HR410
Input range: 0 to 1000%
MP7671.1 % Factor from MP1020.x for feed rate with medium speed range for HR410
Input range: 0 to 1000%
MP7671.2 % Factor from MP1020.x for feed rate with greatest speed range for HR410
Input range: 0 to 1000%