HEIDENHAIN TNC 306 Technical Manual - Manual (Page 255)

3/2000
TNC 416/TNC 406/TNC 306 List of machine parameters 5-7
Machine
parameter Function and input Change
via Reaction Page
MP115.0 Position encoder inputs 1V
PP
or 11µA
Input: %xxxxx
0 = 1 V
PP
1 = 11µA
New MP in TNC 416 software 286 180-01
RESET -
MP115.1 Reserved
Input: %00000
New MP in TNC 416 software 286 180-01
MP115.2 Input frequency of position encoders
Input: %xxxxx
0 = 50kHz for 1V
PP
; 50kHz for 11µA
1 = 350kHz for 1V
PP
; 150kHz for 11µA
New MP in TNC 416 software 286 180-01
RESET -
MP 120.0-4 Assignment of the analog outputs
Entry range: 0 to 4
0 = Analog output 1
1 = Analog output 2
2 = Analog output 3
3 = Analog output 4
4 = Analog output 5 *
RESET 4-12
MP210 Counting direction of the encoder signals
Entry range:
0 to 31 (TNC 306)
% xxxxx (TNC 416/406)
Bit 0 X axis +0 = Positive
+1 = Negative
Bit 1 Y axis +0 = Positive
+2 = Negative
Bit 2 Z axis +0 = Positive
+4 = Negative
Bit 3 4th axis +0 = Positive
+8 = Negative
Bit 4 * 5th axis +0 = Positive
+16 = Negative
RESET 4-7
MP330.0-4 Grating period
Entry range: 1 to 360 [µm] or [1/1000
°]
MP330.0 X axis
MP330.1 Y axis
MP330.2 Z axis
MP330.3 4th axis
MP330.4 5th axis
Canceled in TNC 416 software 286 180-01
Canceled in TNC 406 software 280 620-08
4-6