HEIDENHAIN TNC 306 Technical Manual - Manual (Page 266)

5-18
TNC 416/TNC 406/TNC 306 List of machine parameters 3/2000
3.6 Adaptation of the data interface
Machine
parameter Function and input Change
via Reaction Page
MP5010 EXT mode:
ASCII character for end of data
Entry range: 0 to 127 123 8-26
MP5011 EXT mode:
ASCII character for end of transmission
Entry range: 0 to 127 123 8-26
MP5020 EXT mode: interface configuration
Bit 0 Seven or eight data bits
+0 = 7 data bits
+1 = 8 data bits
Bit 1 No function
Bit 2 Transmission stop via RTS
+0 = inactive
+4 = active
Bit 3 Transmission stop via DC3
+0 = inactive
+8 = active
Bit 4 Character parity even or odd
+0 = even
+16 = odd
Bit 5 Character parity required
+0 = not required
+32 = required
Bit 6 No function
Bit 7 Number of stop bits
+0
= 2 stop bits
+128 = 1 stop bit
123 8-27
MP5100 Parity Bit for LSV2-Protocol
Entry value: 0 to 2
0 = no parity
1 = even parity
2 = odd parity
–
MP5200 Baud rate for RS-422 interface of the
0 = baud rate 9600
1 = baud rate 38400 –
MP5990 Check block number sequence with external data
transfer
Entry value: 0 or 1
0 = Check block number sequence
1 = No check
123 8-26