HEIDENHAIN TNC 306 Technical Manual - Manual (Page 50)

3/99
TNC 416/TNC 406/TNC 306 Nominal value output / Gap signal input 3–35
Suggested solution for connecting and wiring the shielding in the connection box:
Insulated against housing
Leads are provided
with end sleeves.
Cable screens are led onto 0.14 mm 2
insulated strands via crimp eyelets.
SERVO
1 2 3 4 5 6 7 8 9 1 0 11 12 13 14 15 16
LE
•
•
X Y Z S IV
GAP
Pin number Assignment
1 Analog output X-axis
2 Analog output 0V X-axis
3 Analog output Y-axis
4 Analog output 0V Y-axis
5 Analog output Z-axis
6 Analog output 0V Z-axis
7 Analog output IVth axis
8 Analog output 0V IVth axis
11 Analog input Gap signal
12 Analog input 0V Gap signal
13 Screen connection
14 Screen connection
15 Screen connection
16 Screen connection