HEIDENHAIN TNC 306 Technical Manual - Manual (Page 12)

3/2000
TNC 416/TNC 406/TNC 306 Software 2-9
3.1.2 Software types and hardware
HEIDENHAIN has up to now offered several different versions of the LE 360 and LE 360C logic units
and a new LE 406. The following table shows which software type will run on which hardware
version. Since the TNC 306 and TNC 406 are not subject to export restrictions, special export
versions are not necessary.
Control Hardware Id.-Nr. Software type
TNC 416 336 487 3x (for flat panel display BF)
336 486 3x (for CRT color screen BC) 286 18x
TNC 406 288 513 15 280 62x
TNC 306 for BE 212 264 085 96 260 03x
TNC 306 C for BE 212 270 641 25 260 03x
TNC 306 C for BF 110 270 642 25 260 05x
3.1.3 Software releases
New NC software versions are periodically released by HEIDENHAIN.
Software version Release date
TNC 416
286 18x-01
286 18x-02
286 18x-03
286 18x-04 3/99
4/99
4/99
2/2000
Software version Release date
TNC 406
280 62x-01
280 62x-02
280 62x-03
280 62x-04
280 62x-05
280 62x-06
280 62x-07
280 62x-08
280 62x-09
280 62x-10 3/94
10/94
11/95
11/96
2/97
10/98
12/98
3/99
12/99
2/2000