HEIDENHAIN TNC 306 Technical Manual - Manual (Page 392)

7-102
TNC 416/TNC 406/TNC 306 Commands 3/2000
3.14.2 ADD (+)
Abbreviation for PLC Editor: +
Execution time [µs] < 80
Number of bytes STRING memory: 10
Immediate STRING: 18 + n
STRING from error message or dialog files 24
Operands: S
Operation:
With this command another STRING is added to the STRING in the STRING Accumulator. The
selection of the STRINGS, which should be added, proceeds using the Argument after the
operand designation. Refer also to operand explanation. The resultant STRING must not be longer
than 128 characters.
3.14.3 Storing a STRING (=)
Abbreviation for PLC Editor: =
Execution time [µs] < 80
Number of bytes STRING memory 10
Immediate STRING —
STRING from error message or dialog files —
Operands: S
Operation:
With the = command a STRING from the STRING Accumulator is stored in a STRING memory. The
selection of the memory, into which the STRING should be copied, proceeds using the Argument
after the operand designation. Whereby only the Arguments 0 – 3, which address a STRING
memory (S0 – S3) are valid here.