HEIDENHAIN TNC 306 Technical Manual - Manual (Page 271)

3/2000
TNC 416/TNC 406/TNC 306 List of machine parameters 5-23
Machine
parameter Function and input Change
via Reaction Page
MP7310 Graphics display
Entry range: 0 to 3
Bit 0
Projection type for "Projection in 3
planes" display
+ 0 = European preferred
+ 1 = American preferred
Bit 1 Rotation of coordinate system in the
working plane by +90°
+ 0 = No rotation
+ 2 = Rotation
123 4-79
MP7315 Tool radius for graphic simulation without
TOOL CALL
Entry range: 0.000 to 30 000.000 [ mm]
–
MP7316 Tool penetration depth
Entry range: 0.000 to 30 000.000 [ mm]
–
MP7330.0-
15 Determination of user parameters accessible via
MOD function
Entry range: 0 to 9999.99 (number of desired
machine parameter)
4-88