HEIDENHAIN TNC 306 Technical Manual - Manual (Page 463)

9-8
TNC 406/TNC 306 2 Dialogs for user cycles 3/97
2 Dialogs for user cycles
The dialog numbers defined in the dialog blocks of the user cycles determine the text to be
displayed from PLC EPROM.
The following dialog texts are stored in the standard PLC EPROM for the designation of the user
cycle and the input parameters:
Dialog number in user cycle Standard dialog in PLC EPROM
0 USER CYCL
1 CYCL PARAMETER 01
2 CYCL PARAMETER 02
. .
. .
. .
Instead of these standard dialogs, up to 200 different customer-specific dialogs can be stored in PLC
EPROM.