HEIDENHAIN TNC 306 Technical Manual - Manual (Page 17)

3–2
TNC 416/TNC 406/TNC 306 Hardware components 3/99
8 Short-circuit signal/Touch probe input 3–40
8.1 Connection of the short-circuit signals 3–41
8.2 Connection of the touch probe system 3–41
9 Data interface 3–43
9.1 RS-232-C/V.24 data interface 3–43
9.2 RS 422/V.11 data interface 3–44
10 Handwheel input 3–45
10.1 Portable handwheel HR 410 3–45
10.2 Panel-mounted handwheel HR 130 3–48
11 PLC inputs/outputs 3–50
11.1 Technical data 3–50
11.2 Connector assignment 3–51
11.2.1 PLC output 3–52
11.3 PLC I/O expansion board PL 410 B 3–54
11.3.1 PLC inputs/PLC outputs on the PL 410 B 3–55
12 Machine control panel 3–58
13 TNC keyboard 3–60
14 Cable overview 3–62
14.1 Cable overview TNC 416 3–62
14.2 Cable overview TNC 406 3–63
14.3 Cable overview TNC 306 3–64