HEIDENHAIN TNC 306 Technical Manual User Manual
Page 342
7-52
TNC 416/TNC 406/TNC 306
Commands
3/2000
Word execution with the EXCLUSIVE OR command
Operands: B, W, D, K
Operation:
The contents of the Word Accumulator and the contents of the operand (B, W, D, K) are gated with
EXCLUSIVE OR. In accordance with the different sizes of operand (B = 8 bit; W = 16 bit;
D = K = 32 bit), 8, 16 or 32 bits will be influenced in the Accumulator.
Thus:
Bit 0 in the Accumulator is gated with bit 0 in the operand
Bit 1 in the Accumulator is gated with bit 1 in the operand and so on.
The result of the operation is stored in the Word Accumulator.
Example:
The contents of Byte B5 and Byte B6 are to be gated with EXCLUSIVE OR and the result assigned
to Word W8.
Initial state
Byte
B5
= 2A
(hex)
Byte
B6
= 36
(hex)
Word
W8 = ?
Line Instruction
Accumulator contents
Operand contents
Bit
31 . . . 15
7
0
15 8 7 0
... x x x x x x x x x x x x x x x x x x
1
L B6
... 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 1 1 0
00110110
2
XO B5
... 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0
00101010
3
= W8
... 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0
00000000 00011100
Line 1:
The contents of Byte B6 are loaded into the Accumulator.
Line 2:
The contents of the Word Accumulator and Byte B5 are gated with EXCLUSIVE OR.
Line 3:
The gating result is assigned to Word W8.